Top 667 Manufacturing Quotes & Sayings

Canada, the United States and Mexico, we developed these energy reserves that we have in this North American region. And you can see a not only driving down the cost of electricity but a major manufacturing boom in this country. Couple that with tax policy, reduction, reducing the corporate tax rate, and that I think a renaissance in manufacturing like we've never seen in this country and really drive the economy.

To keep up with the demands of the growing manufacturing sector, our Government is pleased to invest in the establishment of the Saskatchewan Manufacturing Centre of Excellence. Training skilled workers and increasing productivity and innovation are essential to the continued growth and prosperity of Saskatchewan, and Western Canada.

Technology has been advancing so fast that the number of jobs globally in manufacturing is declining. There is no way that Trump can bring significant numbers of manufacturing jobs back to the U.S.

Manufacturing is finite, but human intellect is infinite. Textile is all about manufacturing, and industries like pharmaceuticals are all about human intellect.

By the way on economics, South Carolina is an example to the country of what we should be doing as Americans. This country has a vast manufacturing base. It is growing in manufacturing where America is shrinking and it's because they have reduced taxes and lower regulatory burdens and been pro-business.

The economic situation, the high cost of undertaking manufacturing, the supply chain - which is, by the way, dying out also as manufacturing undergoes hardship - make the U.K. not the first place you would look at to make a manufacturing investment.

We lived by very complex import and export policies, a very complex industrial licensing regime. Very few people could get licences, which were required right from manufacturing a pin to manufacturing a car, and generally went to people who found favour with the government.

Silicon Valley needs partners. You can't do edited manufacturing just in the Valley. Why not have the DNA of manufacturing but combine it with the digital world?

Manufacturing is the seed corn for other jobs in the U.S.

Manufacturing is the most important...route to prosperity.

My object, having a surplus to deal with, is to consider how I can deal with it to the greatest advantage to the consumer - how, without inflicting any injury on Canada, I can secure the most substantial benefit to this country, to the manufacturing, to the commercial, and to the agricultural interests. The real way in which we can benefit the working and manufacturing classes is, unquestionably, by removing the burden that presses on the springs of manufactures and commerce.

I want to bring more manufacturing jobs to America. For starters, I want to be behind the initative to build a manufacturing facility in Atlanta.

Nanotechnology is manufacturing with atoms.

Manufacturing all over the world has the benefit of efficiency. That's great. I support it.

Promoting American manufacturing should not be a political issue.

For a country like India, which, unlike China, has domestic market for which manufacturing happens, manufacturing also happens for export.

It's crazy to go into manufacturing. That's not where the money is.

Everyone is concerned about manufacturing in this country.

I think that most manufacturing and mining should be under the purview of state authorities.

Creating life at the speed of light is part of a new industrial revolution. Manufacturing will shift from centralised factories to a distributed, domestic manufacturing future, thanks to the rise of 3D printer technology.

I am no party man in this matter in any degree; and if I have any objection to the motion it is this, that whereas it is a motion to inquire into the manufacturing distress of the country, it should have been a motion to inquire into manufacturing and agricultural distress.

Listen, were losing so much manufacturing, all over the United States.

There were a lot of manufacturing jobs lost over a long period of time and particularly after - during the Great Recession. We've had some recovery in manufacturing employment as the economy's recovered.

There has not been a conscious view of re-energising manufacturing. So, in some form, someone has to wave the Union Jack in the area of manufacturing.

Manufacture, don't just trade. There is money in manufacturing even though it is capital intensive. To achieve a big breakthrough, I had to start manufacturing the same product I was trading on; which is commodities.

A potato can grow quite easily on a very small plot of land. With molecular manufacturing, we'll be able to have distributed manufacturing, which will permit manufacturing at the site using technologies that are low-cost and easily available.

In the four decades after World War II, manufacturing jobs paid more than other jobs for given skills. But that is much less true today. Increased international competition has forced American manufacturers to reduce costs. As a result, the pay premium for low-skilled workers in manufacturing is smaller than it once was.

As we [with Edward Herman] discuss there [in Manufacturing Consent] and elsewhere, recognition of the importance of "manufacturing consent" has become an ever more central theme in the more free societies.

Some countries were able to turn their manufacturing operations into advanced technology areas. South Korea is a great example of this, and manufacturing there is done using advanced technological methods.

I want manufacturing to be back into the United States so that American workers can benefit.

The joke about SAP has always been, it's making '50s German manufacturing methodology, implemented in 1960s software technology, delivered to 1970-style manufacturing organizations, like, it's really - yeah, the incumbency - they are still the lingering hangover from the dot-com crash.

Manufacturing is still very important to us, but we are much more diversified state. And furthermore, anybody that says the steel mills are coming back to Youngstown is not telling the truth. They're not coming back. You could have some aspects of advanced manufacturing appear.

Money is the great instrumentality for manufacturing.

China is still our largest trading partner; however, complementarity between our economies is decreasing. We had the ability to organize a manufacturing process, and then we moved our manufacturing capability to China to make use of their labor pool.

The reason Donald Trump was elected was that we automated away four million manufacturing jobs in Michigan, Ohio, Pennsylvania, and Wisconsin. If you look at the voter data, it shows that the higher the level of concentration of manufacturing robots in a district, the more that district voted for Trump.

Data is of course important in manufacturing, but I place the greatest emphasis on facts.

During the 1960s, and again in the 1970s, growth in manufacturing productivity in the United Kingdom was the lowest of all the seven major industrial countries in the world. During the 1980s, our annual rate of growth of output per head in manufacturing has been the highest of all the seven major industrial countries.

So outside agriculture, in manufacturing and services, we must create a lot more jobs. But that also means that we must ensure that our systems of general education and technical education are in line with the job requirements that a more modern manufacturing and a more modern services sector would require.

3D printing has digitized the entire manufacturing process.

Germany is a fascinating role model. The Germans have maintained their manufacturing edge despite being a high-tax, high-regulation economy. Why? Because the government really set about ensuring that it maintained funding for technical training, technical advancements and programs. It made a concerted effort to retain high-end, complex manufacturing -- the kind of BMW model, if you will. And they've done that so successfully that Germany, which has a quarter of America's population, exports more than America does.

The right focus for the U.S. is on advanced manufacturing - something that requires innovation.

When I was a teenager, the most valuable American companies were in finance and manufacturing.

Our manufacturing in India has grown with a lot of indigenous strength.

We have a very good history of manufacturing in this country but I worry that these skills are being lost. We walk around saying, 'We haven't got any manufacturing any more' but Made In Britain really means something, particularly in other parts of the world. We need to support British manufacturing.

One of the concepts essential to molecular manufacturing is that of a self-replicating manufacturing system. That concept has lagged behind in its acceptance.

Labor-rich manufacturing doesn't exist anymore. Manufacturing jobs are white-collar, Silicon Valley programmers or highly-skilled technicians. They are not going to employ lots of people.

Back in 2005, I introduced a thing which, I don't mind saying this - I mean, we stole it, at least in its basic form, from Toyota - it's called World Class Manufacturing. I mean, it's this pretentious title for something which really involves the revisiting of the manufacturing processes of dedication to the removal of waste.

In truth I was manufacturing a brick wall of shits.

The rumours of the demise of the U.S. manufacturing industry are greatly exaggerated.

We'll be aggressive on trade because we know that deals that have been made historically have resulted in the great loss of manufacturing jobs, a great amount of closed manufacturing businesses. We don't want that to continue.

The manufacturing and packaging of homogeneous experience is what politics in America is about.

With living wage jobs, basically 20 million of them to help jump-start a sustainable and healthy economy, with an insured, just transition, for example, for workers in both the fossil fuel and in the weapons industry, because they all need to transition to sustainable forms of production. This is also our answer to the departure of manufacturing jobs and good jobs by creating the manufacturing base here for clean renewable energy and the efficiency systems and public transportation to put these workers to work in jobs that are actually good for them.

In every society, manufacturing builds the lower middle class. If you give up manufacturing, you end up with haves and have-nots, and you get social polarization. The whole lower middle class sinks.

My family owned a bunch of pharmaceutical manufacturing plants and other consumer-goods manufacturing plants. We would license Western goods and manufacture them in Iran and distribute them throughout the Middle East.

Eliminating business taxes makes US best at manufacturing.

For food service industry and retail, I'm for the minimum wage being increased to at least $12. Not for manufacturing. Software and robotics are going to revolutionize manufacturing in the next 10 years. In the meantime, we have to compete with overseas manufacturing.

For decades, the pace of technological change in manufacturing has outstripped that in the economy as a whole. And, so, firms - manufacturing firms - have found it easier to continue producing by - with - reducing their workforces.

I really believe in U.S. manufacturing and U.S. exports, but we have to have a level playing field.

You incubate a product in an atmosphere where that product is best incubated. So, for example, we incubated our electric scooter in California. Because it's low-volume manufacturing but high-intelligence, intensive manufacturing, we are starting in Michigan.

It's important for our state to expand manufacturing jobs.